< : 'r ', : . .: >Gear surface quenching equipment, high-frequency quenching machine, super-front quenching, uniform, simple and easy to operate gear quenching process:
< : 'r ',: . .: >When using high and medium frequency equipment for induction quenching of gears For gears with a certain modulus, full-tooth penetration quenching is often performed. For gears with high and wide tooth shapes, they can be quenched along the teeth or along the tooth grooves. Liquid spray (mainly water) cooling can be used, or they can be quenched. Use immersion cooling.
< : 'r ',: . .: >When performing full-tooth quenching, the gear should rotate. During single-tooth quenching, the gear should not rotate. After each tooth is quenched, rotate one tooth until all quenching is completed.
< : 'r ',: . .: >Full-tooth induction heating quenching is simple and easy, but the hardened layer is unevenly distributed. Care should be taken to keep the transition zone of the hardened layer away from the area where the tooth root stress is concentrated to avoid damage to the gear. Bending fatigue strength is reduced.
< : 'r ',: . .: >Deformation-free surface gear quenching equipment and super sharp gear heat treatment furnace are the best
< : 'r ',: . .: >Example indicators: Gear quenching equipment with high Frequency heating furnace:
< : 'r ',: . .: >, quenching gear: the diameter reaches the tooth width and the left and right quenching sleeve roller sprocket can be quenched to:. Quenched once.
< : 'r ',: . .: >, The quenching hardness reaches the surface quenching hardness that the material should have, and the quenching depth
< : 'r ',: . .: >, Single tooth quenching can be quenched to about the modulus.
< : 'r ',: . .: >